CCNA Routing and Switching
CCNA Training in Ahmedabad enables candidates to realize a deep insight into networking technologies. It focuses on providing the required skill set required for the in-demand IT job roles.
Call The Trainer
Batch Timing
- Regular: 2 Batches
- Weekends: 2 Batches
Request Call Back
Class Room & Online Training Quotation
About CCNA R&S
The CISCO Certified Network Associate (CCNA) certification is a stepping stone for professionals. Learners, who are willing to make a career in networking or IT technology, can take CCNA Course in Ahmedabad. The CCNA course, is a well-thought-out covering a broad range of fundamentals of IT careers. The CCNA certification validates knowledge of the candidate and skills related to network fundamentals, Wide Area Networks (WAN), Wireless networks, IP connectivity, IP services, Security fundamentals, and automation & programmability
CCNA Course Objectives
By the top of the CCNA training in Ahmedabad, candidates are going to be able to:
• Understand the role and functions of various network components like routers, switches, next-generation firewalls, IPS, controllers, and lots of more.
• Interpret various specification topologies
• Learn the way to configure IPV4 and IPV6 addressing
• Understand virtualization fundamentals and switching concepts
• Configure and verify VLANs many switches, discovery protocols, EtherChannel (LACP)
• Comprehend CISCO remote engineering and AP models and WLAN parts
• Learn about the components of the routing table and the way the router makes forwarding decisions
• Configure IPV4 and IPV6 routing and single-area OSPFv2
• Comprehend many IP services
•Figure out how to arrange and check inside source NAT utilizing static and pool.
• Comprehend the part of DHCP, DNS, and SNMP
• Comprehend different organization security basics, including remote security conventions, security secret key approaches, access control, and design of WLAN utilizing WPA2 PSK
• Differentiate traditional networking and controller-based networking
• Understand Controller-based and software-defined architecture
• Describe rest-based APIs
• Interpret JSON encoded data.
How does SevenMentor's CCNA training in Ahmedabad helps in your IT career?
We widely know the Cisco Certified Networking Associate (CCNA) in the industry. Learners know it for its comprehensive curriculum. The course covers all the concepts that are needed to handle the responsibilities of the network administrator. This certification program is often helpful to start your career in computer networks. CCNA Course in Ahmedabad up skills you with other expert-level programs.
Interested sessions with a 100% clearance ratio
Each session, we plan in a way that you fall crazy with networking and learn while enjoying it. We arrange special doubt clearing sessions and 100% assurance of exam clearance we provide.
Well-equipped lab with all required resources
All the resources required to style and monitor the network are available in our labs; so that you will practice every concept with no compromise and become confident about your skills.
Best CCNA Course in Ahmedabad
CCNA is the basic and must step for any student to excel in the IT or Networking Industry. CCNA is the plinth to create a successful career with a 100% Job guarantee and security. The network engineering skills you will gain from this course are often wont to support and manage information networks in the industry. You will be placed in network management or design. Both areas command good salaries. Experts with solid mastery in systems administration frameworks are vital for any medium to enormous scope endeavour.
• MODULE 1 presents the methods required for network designing. It incorporates fundamental gadgets and correspondences, early on CISCO networking, and Entrepreneurial Studies.
The CCNA course IN Ahmedabad offers you the talents to become a practitioner either during a firm or through creating your own company.
• MODULE 2 looks at networking, security and infrastructure, communications, and mobile computing. You will also concentrate on the software or hardware of networking. As a part of your course, you will participate in the CISCO Networking Academy Programme and steel yourself against CISCO Certified Network Associate (CCNA) and CISCO Certified Network Professional (CCNP) certification.
• Land your FIRST Position after Diploma or Degree/Upgrade your Career after filling in as a Desktop Engineer. Target audience / Qualification Required:
• All Undergraduates/Graduates from BCA, BE, BSCIT, BCOM, BTECH & Diploma Holders who have an interest in Networking Domain are eligible for this CCNA Training in Ahmedabad
• Desktop Professionals – Looking forward to uplifting their career by acquiring extra skills in the network engineering domain
Online Classes
Ahmedabad delivered to you right at your place. Instructor-led online CCNA training in Ahmedabad is a perfect vehicle for delivering training to individuals anywhere in the world at any time. This innovative approach presents live content with instructors delivering the CCNA training online. Candidates are going to be performing labs remotely in our labs on cloud facilities in the presence of a web instructor. Instructor-Led CCNA Training in Ahmedabad can help today’s busy professionals to do their jobs and upgrade knowledge.
Advances in network technology, improvements in bandwidth, interactions, chat and conferencing, real-time audio and video offer unparalleled training opportunities. SevenMentor uses Microsoft Lync engine, organized content, labs on the cloud, and well-crafted equipment to deliver Instructor-Led Online Training. Our Training designers have created programming for top levels of interaction.
Course Eligibility
There is no such criteria for joining Online CCNA Training. CCNA is an associate or entry level certification exam for those who are planning to build their career in the most demanding field of networking.
- 10+2 students can go for CCNA Training in Ahmedabad
- Undergraduates and graduates
- Professionals who want switch
- Those who are interested in Networking
Syllabus CCNA R&S
Cisco Certified Network Associate (200-301)
Exam Description: The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-301) is a 90-minute, 50–60 question assessment that is associated with the CCNA Routing and Switching certification. This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management .The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
15% 1.0 Network Fundamentals
21% 2.0 LAN Switching Technologies
23% 3.0 Routing Technologies
10% 4.0 WAN Technologies
10% 5.0 Infrastructure Services
11% 6.0 Infrastructure Security
10% 7.0 Infrastructure Management
- 1.0 Network Fundamentals
- 1.1. Compare and contrast OSI and TCP/IP models
- 1.2. Compare and contrast TCP and UDP protocols
- 1.3. Describe the impact of infrastructure components in an enterprise network
- 1.3.1. Firewalls
- 1.3.2. Access points
- 1.3.3. Wireless controllers
- 1.4. Describe the effects of cloud resources on enterprise network architecture
- 1.4.1. Traffic path to internal and external cloud services
- 1.4.2. Virtual services
- 1.4.3. Basic virtual network infrastructure
- 1.5. Compare and contrast collapsed core and three-tier architectures
- 1.6. Compare and contrast network topologies
- 1.6.1. Star
- 1.6.2. Mesh
- 1.6.3. Hybrid
- 1.7. Select the appropriate cabling type based on implementation requirements
- 1.8. Apply troubleshooting methodologies to resolve problems
- 1.8.1. Perform and document fault isolation
- 1.8.2. Resolve or escalate
- 1.8.3. Verify and monitor resolution
- 1.9. Configure, verify, and troubleshoot IPv4 addressing and subnetting
- 1.10. Compare and contrast IPv4 address types
- 1.10.1. Unicast
- 1.10.2. Broadcast
- 1.10.3. Multicast
- 1.11. Describe the need for private IPv4 addressing
- 1.12. Identify the appropriate IPv6 addressing scheme to satisfy< addressing requirements in a LAN/WAN environment
- 1.13. Configure, verify, and troubleshoot IPv6 addressing
- 1.14. Configure and verify IPv6 Stateless Address Auto Configuration
- 1.15. Compare and contrast IPv6 address types
- 1.15.1. Global unicast
- 1.15.2. Unique local
- 1.15.3. Link local
- 1.15.4. Multicast
- 1.15.5. Modified EUI 64
- 1.15.6. Autoconfiguration
- 1.15.7. Anycast
- LAN Switching Technologies
- 2.1. Describe and verify switching concepts
- 2.1.1. MAC learning and aging
- 2.1.2. Frame switching
- 2.1.3. Frame flooding
- 2.1.4. MAC address table
- 2.2. Interpret Ethernet frame format
- 2.3. Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
- 2.4. Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
- 2.4.1. Access ports (data and voice)
- 2.4.2. Default VLAN
- 2.5. Configure, verify, and troubleshoot interswitch connectivity
- 2.5.1. Trunk ports
- 2.5.2. Add and remove VLANs on a trunk
- 2.5.3. DTP, VTP (v1&v2), and 802.1Q
- 2.5.4. Native VLAN
- 2.6. Configure, verify, and troubleshoot STP protocols
- 2.6.1. STP mode (PVST+ and RPVST+)
- 2.6.2. STP root bridge selection
- 2.7. Configure, verify and troubleshoot STP related optional features
- 2.7.1. PortFast
- 2.7.2. BPDU guard
- 2.8. Configure and verify Layer 2 protocols
- 2.8.1. Cisco Discovery Protocol
- 2.8.2. LLDP
- 2.9. Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
- 2.9.1. Static
- 2.9.2. PAGP
- 2.9.3. LACP
- 2.10. Describe the benefits of switch stacking and chassis aggregation
- 3.0 Routing Technologies
- 3.1. Describe the routing concepts
- 3.1.1. Packet handling along the path through a network
- 3.1.2. Forwarding decision based on route lookup
- 3.1.3. Frame rewrite
- 3.2. Interpret the components of a routing table
- 3.2.1. Prefix
- 3.2.2. Network mask
- 3.2.3. Next hop
- 3.2.4. Routing protocol code
- 3.2.5. Administrative distance
- 3.2.6. Metric
- 3.2.7. Gateway of last resort
- 3.3. Describe how a routing table is populated by different routing information sources
- 3.3.1. Admin distance
- 3.4. Configure, verify, and troubleshoot inter-VLAN routing
- 3.4.1. Router on a stick
- 3.4.2. SVI
- 3.5. Compare and contrast static routing & dynamic routing
- 3.6. Compare and contrast distance vector and link state routing protocols
- 3.7. Compare and contrast interior and exterior routing protocols
- 3.8. Configure, verify, and troubleshoot IPv4 and IPv6 static routing
- 3.8.1. Default route
- 3.8.2. Network route
- 3.8.3. Host route
- 3.8.4. Floating static
- 3.9. Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
- 3.10. Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
- 3.11. Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization redistribution, stub)
- 3.12. Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization redistribution, stub)
- 3.13. Configure, verify, and troubleshoot RIPv2 for Ipv4 (excluding authentication, filtering manual summarization, redistribution)
- 3.14. Troubleshoot basic Layer 3 end-to-end connectivity issues
- 4.0 WAN Technologies
- 4.1. Configure and verify PPP and MLPPP on WAN interfaces using local authentication
- 4.2. Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
- 4.3. Configure, verify, and troubleshoot GRE tunnel connectivity
- 4.4. Describe WAN topology options
- 4.4.1. Point-to-point
- 4.4.2. Hub and spoke
- 4.4.3. Full mesh
- 4.4.4. Single vs dual-homed
- 4.5. Describe WAN access connectivity options
- 4.5.1. MPLS
- 4.5.2. Metro Ethernet
- 4.5.3. Broadband PPPoE
- 4.5.4. Internet VPN (DMVPN, site-to-site VPN, client VPN)
- 4.6. Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
- 4.7. Describe basic QoS concepts
- 4.7.1. Marking
- 4.7.2. Device trust
- 4.7.3. Prioritization
- A. Voice
- B. Video
- C. Data
- 4.7.4. Shaping
- 4.7.5. Policing
- 4.7.6. Congestion management
- 5.0 Infrastructure Services
- 5.1. Describe DNS lookup operation
- 5.2. Troubleshoot client connectivity issues involving DNS
- 5.3. Configure and verify DHCP on a router (excluding static reservations)
- 5.3.1. Server
- 5.3.2. Relay
- 5.3.3. Client
- 5.3.4. TFTP, DNS, and gateway options
- 5.4. Troubleshoot client- and router-based DHCP connectivity issues
- 5.5. Configure, verify, and troubleshoot basic HSRP
- 5.5.1. Priority
- 5.5.2. Preemption
- 5.5.3. Version
- 5.6. Configure, verify, and troubleshoot inside source NAT
- 5.6.1. Static
- 5.6.2. Pool
- 5.6.3. PAT
- 5.7. Configure and verify NTP operating in a client/server mode
- 6.0 Infrastructure Security
- 6.1. Configure, verify, and troubleshoot port security
- 6.1.1. Static
- 6.1.2. Dynamic
- 6.1.3. Sticky
- 6.1.4. Max MAC addresses
- 6.1.5. Violation actions
- 6.1.6. Err-disable recovery
- 6.2. Describe common access layer threat mitigation techniques
- 6.2.1. 802.1x
- 6.2.2. DHCP snooping
- 6.2.3. Nondefault native VLAN
- 6.3. Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
- 6.3.1. Standard
- 6.3.2. Extended
- 6.3.3. Named
- 6.4. Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
- 6.5. Configure, verify, and troubleshoot basic device hardening
- 6.5.1. Local authentication
- 6.5.2. Secure password
- 6.5.3. Access to device
- A. Source address
- B. Telnet/SSH
- 6.5.4. Login banner
- 6.5.5. Describe device security using AAA with TACACS+ and RADIUS
- 7.1. Configure and verify device-monitoring protocols
- 7.1.1. SNMPv2
- 7.1.2. SNMPv3
- 7.1.3. Syslog
- 7.2. Troubleshoot network connectivity issues using ICMP echo-based IP SLA
- 7.3. Configure and verify device management
- 7.3.1. Backup and restore device configuration
- 7.3.2. Using Cisco Discovery Protocol or LLDP for device discovery
- 7.3.3. Licensing
- 7.3.4. Logging
- 7.3.5. Timezone
- 7.3.6. Loopback
- 7.4. Configure and verify initial device configuration
- 7.5. Perform device maintenance
- 7.5.1. Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
- 7.5.2. Password recovery and configuration register
- 7.5.3. File system management
- 7.6. Use Cisco IOS tools to troubleshoot and resolve problems
- 7.6.1. Ping and traceroute with extended option
- 7.6.2. Terminal monitor
- 7.6.3. Log events
- 7.6.4. Local SPAN
- 7.7. Describe network programmability in enterprise network architecture
- 7.7.1. Function of a controller
- 7.7.2. Separation of control plane and data plane
- 7.7.3. Northbound and southbound APIs
Trainer Profile of CCNA R&S Training in Ahmedabad
At SevenMentor, you can take either the teacher drove online training or classroom training. Aside from this, SevenMentor additionally offers corporate training for associations to upskill their workforce. All mentors at SevenMentor have a years important industry experience, and they have been effectively functioning as advisors in a similar space, which has made them topic specialists. You can have a demo lecture to check the quality of our trainers.
- Certified Professionals with more than 8+ Years of Experience
- Trained more than 2000+ students in a year
- Strong Theoretical & Practical Knowledge in their domains
- Expert level Subject Knowledge and fully up-to-date on real-world industry applications
CCNA R&S Exams & Certification
SevenMentor Certification is Accredited by all major Global Companies around the world. We provide after completion of the theoretical and practical sessions to fresher’s as well as corporate trainees.
Our certification at SevenMentor is accredited worldwide. It increases the value of your resume and you can attain leading job posts with the help of this certification in leading MNC’s of the world. The certification is only provided after successful completion of our training and practical based projects.
Proficiency After Training
- Describe how Components Operate, identifying Important Elements, a function of network Elements, as well as the OSI reference model
- Employing the host-to-host Parcel delivery process, Clarify Problems related to increasing traffic on an Ethernet LAN and identify Changed LAN technology Alternatives into Ethernet networking Problems
- Describe the reasons for Expanding the reach of a LAN as well as the methods Which Can Be Utilized, with a focus on RF wireless Accessibility
- Explain the reasons for Linking networks Using routers and the Way routed networks transmit Information via networks using TCP / IP
- Explain the Use of WANs, the Significant Apparatus of WANs, Also configure PPP encapsulation, static and dynamic routing, PAT, and RIP routing
- Utilize the command-line Port to Detect neighbors on the Community and manage the router startup and Configuration
Key Features
Skill Level
Beginner, Intermediate, Advance
We are providing Training to the needs from Beginners level to Experts level.
Course Duration
90 Hours
Course will be 90 hrs to 110 hrs duration with real-time projects and covers both teaching and practical sessions.
Total Learners
2000+ Learners
We have already finished 100+ Batches with 100% course completion record.
Assignments Duration
50 Hours
Trainers will provide you the assignments according to your skill sets and needs. Assignment duration will be 50 hrs to 60 hrs.
Support
24 / 7 Support
We are having 24/7 Support team to clear students’ needs and doubts. And special doubt clearing sessions every week.
Frequently Asked Questions
Batch Schedule
| DATE | COURSE | TRAINING TYPE | BATCH | CITY | REGISTER |
|---|---|---|---|---|---|
| 25/11/2024 | CCNA Routing and Switching | Online | Regular Batch (Mon-Sat) | Ahmedabad | Book Now |
| 26/11/2024 | CCNA Routing and Switching | Online | Regular Batch (Mon-Sat) | Ahmedabad | Book Now |
| 23/11/2024 | CCNA Routing and Switching | Online | Weekend Batch (Sat-Sun) | Ahmedabad | Book Now |
| 23/11/2024 | CCNA Routing and Switching | Online | Weekend Batch (Sat-Sun) | Ahmedabad | Book Now |
Students Reviews
I would like to precise my deepest gratitude to Trainer, who helped me to pass my exam. The Trainer went the additional mile to help me, and that I have gained a benefit due to his knowledge and skills in Information Security.
- Nikhil Tupe
The Trainer is a superb Security expert and has many industry & training experience. He is very punctual about the category timing and explained everything, and puts overtime for slow students. After the category, he always follows up regarding the study progress. I might suggest everyone choose SevenMentor for other IT security certifications also.
- Tanvir Shaikh
I would like to thank the Trainer for the improved training provided for my preparation. He has extensive knowledge of this subject, a continuing motivator, and an excellent person. Our Trainer has been available to support us whenever we would have liked and helped us answer our queries. I might highly recommend him for all advanced information security training.
- Neha Patil
Course video & Images
Corporate Training
You are going to be learning the way to use CCNA from beginner level to advanced level. Experienced working professionals from different companies teach the scholars. With our Best CCNA Training in Ahmedabad, we confirm that; students learn the CCNA Course practically to assist, to do better in their jobs. Our CCNA Classes in Ahmedabad with a guaranteed placement program helps students secure their jobs after CCNA Training. We offer corporate training to upgrade the knowledge to the employees. It will support the promotion in the job. So use the opportunity to be updated and a step ahead with the CCNA Course in Ahmedabad.
Our Placement Process
Eligibility Criteria
Placements Training
Interview Q & A
Resume Preparation
Aptitude Test
Mock Interviews
Scheduling Interviews
Job Placement
Related Courses
Have a look at all our related courses to learn from any location
CCNA Security class is the greatest training tool for engineers following the Cisco Certified Network Associate Security (CCNA Security) certification.
The CCNP Certification is just one among the vital certifications from Cisco a media professional must want to proceed in his profession.
An Advanced level in cisco certification-networking training is intended for professionals with prior experience in the networking field.
Request For Call Back
Class Room & Online Training Quotation
