CCNA

One of the most popular certifications in the networking sector is the CCNA Course Implementing and Administering Cisco Solutions. The CCNA exam validates your network foundations, network access, IP connection, IP services, security basics, and automation and programmability knowledge and abilities.

Request Call Back

Call The Trainer

+91 7798058777

Batch Timing

Regular: 2 Batches
Weekends: 2 Batches

Request Call Back
Class Room & Online Training Quotation

Education is The Foundation Upon Which We Build Our Nation, lets Educate Oneself to Become Weapon Against Unemployment with Upto 70% Off On All Courses

About CCNA

The Implementing and Administering Cisco Solutions (CCNA) course provides you with a broad variety of core IT skills. You'll learn how to build, run, configure, and validate basic IPv4 and IPv6 networks using a combination of lectures, hands-on laboratories, and self-study. Configuring network components such as switches, routers, and wireless LAN controllers, as well as controlling network devices and recognizing fundamental security concerns are all covered in this course. You'll also learn about network programmability, automation, and software-defined networking in this course. CCNA course in USA will prepare you for the Cisco Certified Network Associate (CCNA®) test 200-301. You will receive your CCNA certification if you pass this one exam.

This is not a networking course for beginners. Students should have a fundamental understanding of networking, such as job experience or certifications such as CompTIA Network+. We recommend starting with our CompTIA A+ and Network+ courses if you're new to networking.

Who should attend CCNA training?
CCNA course in USA covers how to link Cisco Catalyst switches and Cisco routers in local-area networks (LANs) and wide-area networks (WANs) in small to medium-sized network sites. Students will learn how to select, connect, configure, and troubleshoot various Cisco networking devices after completing this course.

CCNA Training in USA covers all you need to know about deploying Cisco routers in a networked environment. Students obtain the foundational knowledge and skills needed to install, configure, and troubleshoot Cisco routers through rigorous hands-on exercises. CCNA classes in USA is beneficial to people who want to learn how to design and implement inter-networks using Cisco routers, as well as those who want to study for and take the Cisco Certified Network Associate (CCNA) Exam. With parental permission, anyone between the ages of 13 and 17 can take the CCNA course in USA. Candidates must be 18 years old or older to apply for this course, and parental authorization is not required.

How does the CCNA course help in career growth?
The CCNA (Cisco Certified Network Associate) certification can help you prepare for associate-level IT jobs today. It covers a wide range of IT-related fundamentals and concepts. Network fundamentals, network access, IP connection, IP services, security fundamentals, and automation and programmability are all covered by the CCNA certification. The CCNA certification verifies your ability to optimize and operate today's most modern networks.

You must pass the CCNA exam to obtain CCNA certification (200-301 exam). You'll be able to recognize computer network components, install and configure switches and routers, configure IOS system monitoring tools, and much more once you've earned your CCNA certification. All you need is the correct CCNA course to get your CCNA certification.

The CCNA certification shows your capacity to control every IT ecosystem. Internet foundations, IP services, cybersecurity fundamentals, automation, and programmability are now all covered inside this CCNA test. CCNA certifies that you have the skills to handle and optimize yesterday's latest modern networks. It is designed for both agility and versatility.

The CCNA training class plus exam lay the foundations for you to go in any route with your career. Whenever you certify with Cisco, employees are living proof of the high standards as well as rigor many businesses cherish and rely on to help fulfill market needs.

Why do CCNA Courses?
You will earn the CCNA and CCNP certifications through this single course, which will open up a variety of professional prospects, including networking engineering and security operations in organizations.

The CCNA and CCNP Packaged course will teach you how to plan, implement, verify, and debug local and wide-area enterprise networks, as well as how to collaborate with experts in sophisticated security, phone, wireless, and video solutions. Those who earn the CCNP Routing and Switching certification can show that they have the abilities needed for jobs like senior network technician, network engineer, and support engineer in the enterprise. This course is designed to teach you the skills you'll need to design, build, and maintain computer networks, as well as to prepare you to sit for the Cisco Certified Networking Associate (CCNA) and Cisco Certified Networking Professional (CCNP) tests.

Routing and switching protocol knowledge will give a long-term foundation because these skills are equally applicable in today's physical networks as they are in tomorrow's virtualized network activities. Understanding network infrastructure and protocols, as well as how they interact, can help you not only excel today but also stay current as technology advances. The CCNA Enterprise Networking, Security, and Automation and CCNP Enterprise Core and Advanced Routing courses can help you reach these goals.

Online Classes

Our institute, SevenMentor Institute, offers online courses on any subject. We are the top technology, networking, and software development training institute in the world. We advise students to pick their courses carefully so that they can excel in their chosen technology field. We guarantee 100% placement and provide excellent training to our candidates. Using test scores and lab exams, we maintain track of candidates' progress. Students are welcome to join our panel and enroll in the courses offered by SevenMentor Training Institute.

Course Eligibility

There is no such criteria for joining Online CCNA Training. CCNA is an associate or entry level certification exam for those who are planning to build their career in the most demanding field of networking.

10+2 students can go for CCNA Training
Undergraduates and graduates
Professionals who want switch
Those who are interested in Networking

Syllabus CCNA R&S

Download Syllabus

Cisco Certified Network Associate (200-301)
Exam Description: The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-301) is a 90-minute, 50–60 question assessment that is associated with the CCNA Routing and Switching certification. This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management .The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
15% 1.0 Network Fundamentals
21% 2.0 LAN Switching Technologies
23% 3.0 Routing Technologies
10% 4.0 WAN Technologies
10% 5.0 Infrastructure Services
11% 6.0 Infrastructure Security
10% 7.0 Infrastructure Management

1.0 Network Fundamentals
1.1. Compare and contrast OSI and TCP/IP models
1.2. Compare and contrast TCP and UDP protocols
1.3. Describe the impact of infrastructure components in an enterprise network
1.3.1. Firewalls
1.3.2. Access points
1.3.3. Wireless controllers
1.4. Describe the effects of cloud resources on enterprise network architecture
1.4.1. Traffic path to internal and external cloud services
1.4.2. Virtual services
1.4.3. Basic virtual network infrastructure
1.5. Compare and contrast collapsed core and three-tier architectures
1.6. Compare and contrast network topologies
1.6.1. Star
1.6.2. Mesh
1.6.3. Hybrid
1.7. Select the appropriate cabling type based on implementation requirements
1.8. Apply troubleshooting methodologies to resolve problems
1.8.1. Perform and document fault isolation
1.8.2. Resolve or escalate
1.8.3. Verify and monitor resolution
1.9. Configure, verify, and troubleshoot IPv4 addressing and subnetting
1.10. Compare and contrast IPv4 address types
1.10.1. Unicast
1.10.2. Broadcast
1.10.3. Multicast
1.11. Describe the need for private IPv4 addressing
1.12. Identify the appropriate IPv6 addressing scheme to satisfy< addressing requirements in a LAN/WAN environment
1.13. Configure, verify, and troubleshoot IPv6 addressing
1.14. Configure and verify IPv6 Stateless Address Auto Configuration
1.15. Compare and contrast IPv6 address types
1.15.1. Global unicast
1.15.2. Unique local
1.15.3. Link local
1.15.4. Multicast
1.15.5. Modified EUI 64
1.15.6. Autoconfiguration
1.15.7. Anycast

LAN Switching Technologies
2.1. Describe and verify switching concepts
2.1.1. MAC learning and aging
2.1.2. Frame switching
2.1.3. Frame flooding
2.1.4. MAC address table
2.2. Interpret Ethernet frame format
2.3. Troubleshoot interface and cable issues (collisions, errors, duplex, speed)
2.4. Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
2.4.1. Access ports (data and voice)
2.4.2. Default VLAN
2.5. Configure, verify, and troubleshoot interswitch connectivity
2.5.1. Trunk ports
2.5.2. Add and remove VLANs on a trunk
2.5.3. DTP, VTP (v1&v2), and 802.1Q
2.5.4. Native VLAN
2.6. Configure, verify, and troubleshoot STP protocols
2.6.1. STP mode (PVST+ and RPVST+)
2.6.2. STP root bridge selection
2.7. Configure, verify and troubleshoot STP related optional features
2.7.1. PortFast
2.7.2. BPDU guard
2.8. Configure and verify Layer 2 protocols
2.8.1. Cisco Discovery Protocol
2.8.2. LLDP
2.9. Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
2.9.1. Static
2.9.2. PAGP
2.9.3. LACP
2.10. Describe the benefits of switch stacking and chassis aggregation

3.0 Routing Technologies
3.1. Describe the routing concepts
3.1.1. Packet handling along the path through a network
3.1.2. Forwarding decision based on route lookup
3.1.3. Frame rewrite
3.2. Interpret the components of a routing table
3.2.1. Prefix
3.2.2. Network mask
3.2.3. Next hop
3.2.4. Routing protocol code
3.2.5. Administrative distance
3.2.6. Metric
3.2.7. Gateway of last resort
3.3. Describe how a routing table is populated by different routing information sources
3.3.1. Admin distance
3.4. Configure, verify, and troubleshoot inter-VLAN routing
3.4.1. Router on a stick
3.4.2. SVI
3.5. Compare and contrast static routing & dynamic routing
3.6. Compare and contrast distance vector and link state routing protocols
3.7. Compare and contrast interior and exterior routing protocols
3.8. Configure, verify, and troubleshoot IPv4 and IPv6 static routing
3.8.1. Default route
3.8.2. Network route
3.8.3. Host route
3.8.4. Floating static
3.9. Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.10. Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6 (excluding authentication, filtering, manual summarization, redistribution, stub, virtual-link, and LSAs)
3.11. Configure, verify, and troubleshoot EIGRP for IPv4 (excluding authentication, filtering, manual summarization redistribution, stub)
3.12. Configure, verify, and troubleshoot EIGRP for IPv6 (excluding authentication, filtering, manual summarization redistribution, stub)
3.13. Configure, verify, and troubleshoot RIPv2 for Ipv4 (excluding authentication, filtering manual summarization, redistribution)
3.14. Troubleshoot basic Layer 3 end-to-end connectivity issues

4.0 WAN Technologies
4.1. Configure and verify PPP and MLPPP on WAN interfaces using local authentication
4.2. Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
4.3. Configure, verify, and troubleshoot GRE tunnel connectivity
4.4. Describe WAN topology options
4.4.1. Point-to-point
4.4.2. Hub and spoke
4.4.3. Full mesh
4.4.4. Single vs dual-homed
4.5. Describe WAN access connectivity options
4.5.1. MPLS
4.5.2. Metro Ethernet
4.5.3. Broadband PPPoE
4.5.4. Internet VPN (DMVPN, site-to-site VPN, client VPN)
4.6. Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
4.7. Describe basic QoS concepts
4.7.1. Marking
4.7.2. Device trust
4.7.3. Prioritization
A. Voice
B. Video
C. Data
4.7.4. Shaping
4.7.5. Policing
4.7.6. Congestion management

5.0 Infrastructure Services
5.1. Describe DNS lookup operation
5.2. Troubleshoot client connectivity issues involving DNS
5.3. Configure and verify DHCP on a router (excluding static reservations)
5.3.1. Server
5.3.2. Relay
5.3.3. Client
5.3.4. TFTP, DNS, and gateway options
5.4. Troubleshoot client- and router-based DHCP connectivity issues
5.5. Configure, verify, and troubleshoot basic HSRP
5.5.1. Priority
5.5.2. Preemption
5.5.3. Version
5.6. Configure, verify, and troubleshoot inside source NAT
5.6.1. Static
5.6.2. Pool
5.6.3. PAT
5.7. Configure and verify NTP operating in a client/server mode

6.0 Infrastructure Security
6.1. Configure, verify, and troubleshoot port security
6.1.1. Static
6.1.2. Dynamic
6.1.3. Sticky
6.1.4. Max MAC addresses
6.1.5. Violation actions
6.1.6. Err-disable recovery
6.2. Describe common access layer threat mitigation techniques
6.2.1. 802.1x
6.2.2. DHCP snooping
6.2.3. Nondefault native VLAN
6.3. Configure, verify, and troubleshoot IPv4 and IPv6 access list for traffic filtering
6.3.1. Standard
6.3.2. Extended
6.3.3. Named
6.4. Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
6.5. Configure, verify, and troubleshoot basic device hardening
6.5.1. Local authentication
6.5.2. Secure password
6.5.3. Access to device
A. Source address
B. Telnet/SSH
6.5.4. Login banner
6.5.5. Describe device security using AAA with TACACS+ and RADIUS

7.1. Configure and verify device-monitoring protocols
7.1.1. SNMPv2
7.1.2. SNMPv3
7.1.3. Syslog
7.2. Troubleshoot network connectivity issues using ICMP echo-based IP SLA
7.3. Configure and verify device management
7.3.1. Backup and restore device configuration
7.3.2. Using Cisco Discovery Protocol or LLDP for device discovery
7.3.3. Licensing
7.3.4. Logging
7.3.5. Timezone
7.3.6. Loopback
7.4. Configure and verify initial device configuration
7.5. Perform device maintenance
7.5.1. Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
7.5.2. Password recovery and configuration register
7.5.3. File system management
7.6. Use Cisco IOS tools to troubleshoot and resolve problems
7.6.1. Ping and traceroute with extended option
7.6.2. Terminal monitor
7.6.3. Log events
7.6.4. Local SPAN
7.7. Describe network programmability in enterprise
7.7.1. Function of a controller
7.7.2. Separation of control plane and data plane
7.7.3. Northbound and southbound APIs

Trainer Profile of CCNA

At SevenMentor, you can take either the teacher drove online training or classroom training. Aside from this, SevenMentor additionally offers corporate training for associations to upskill their workforce. All mentors at SevenMentor have a years important industry experience, and they have been effectively functioning as advisors in a similar space, which has made them topic specialists. You can have a demo lecture to check the quality of our trainers.

Certified Professionals with more than 8+ Years of Experience
Trained more than 2000+ students in a year
Strong Theoretical & Practical Knowledge in their domains
Expert level Subject Knowledge and fully up-to-date on real-world industry applications

CCNA Exams & Certification

SevenMentor Certification is Accredited by all major Global Companies around the world. We provide after completion of the theoretical and practical sessions to fresher’s as well as corporate trainees.
Our certification at SevenMentor is accredited worldwide. It increases the value of your resume and you can attain leading job posts with the help of this certification in leading MNC’s of the world. The certification is only provided after successful completion of our training and practical based projects.

Get Certified

Proficiency After Training

Describe how Components Operate, identifying Important Elements, a function of network Elements, as well as the OSI reference model
Employing the host-to-host Parcel delivery process, Clarify Problems related to increasing traffic on an Ethernet LAN and identify Changed LAN technology Alternatives into Ethernet networking Problems
Describe the reasons for Expanding the reach of a LAN as well as the methods Which Can Be Utilized, with a focus on RF wireless Accessibility
Explain the reasons for Linking networks Using routers and the Way routed networks transmit Information via networks using TCP / IP
Explain the Use of WANs, the Significant Apparatus of WANs, Also configure PPP encapsulation, static and dynamic routing, PAT, and RIP routing
Utilize the command-line Port to Detect neighbors on the Community and manage the router startup and Configuration

Key Features

Skill level

Beginner, Intermediate, Advance

We are providing Training to the needs from Beginners level to Experts level.

Course Duration

90 Hours

Course will be 90 hrs to 110 hrs duration with real-time projects and covers both teaching and practical sessions.

Total Learners

2000+ Learners

We have already finished 100+ Batches with 100% course completion record.

Frequently Asked Questions

How long should you study for the CCNA?

If you've never worked with networks before, you'll require roughly 6 months or more, depending on how many hours per week you'll be working. Before beginning your CCNA training course, all you need to know is the fundamentals of computers and networks.

Is it worthwhile to take CCNA classes?

CCNA credentials are valid for three years from the date of acquisition, and you can renew them by bypassing the CCNA exam or getting one of the higher-level professional certifications (CCNP). Finally, we may conclude that obtaining a CCNA certification is still worthwhile.

How many hours should I devote to studying for the CCNA?

If you study CCNA for 10 hours per week (quite a chunk of time for most people), it may take you 10-15 weeks to read books, watch videos, talk in communities, take practice examinations, practice subnetting, practice hands-on skills, review, and so on.

Is the CCNA in high demand?

India is one of the countries that is rapidly becoming a global networking powerhouse, so the demand for CCNA specialists is expected to rise. Many networking behemoths such as Cisco, British Telecom, IBM, and others have already entered the Indian market, with more on the way.

Is the CCNA certification free of charge?

The Cisco Certified Network Associate (CCNA) is a worldwide recognised associate-level IT networking certification. The CCNA test content and course flow of our entire CCNA certification training are also included in this free CCNA course.

Batch Schedule

DATE	COURSE	TRAINING TYPE	BATCH	CITY	REGISTER
16/12/2024	CCNA	Online	Regular Batch (Mon-Sat)	USA	Book Now
17/12/2024	CCNA	Online	Regular Batch (Mon-Sat)	USA	Book Now
14/12/2024	CCNA	Online	Weekend Batch (Sat-Sun)	USA	Book Now
14/12/2024	CCNA	Online	Weekend Batch (Sat-Sun)	USA	Book Now

Students Reviews

Communication, Professionalism, Quality, Value For months, I struggled to find motivation in other online classes. This is the best online live course. Trainers cut to the point of what you need to know and have phenomenal material on mindset. Passed above average on all sections just a few days after completing the CCNA course.

- Sakshi Deshmukh

Communication, Professionalism, Quality, Value A good place to learn and start in the field of technology I would recommend attending one of their many classes.

- Anant Singh

As a reminder, I went over the fundamentals of Word and Excel. The professors did an excellent job of covering the main points. I enjoy the fact that you can have a free retake if necessary.

- Vivek Biswas

Course video & Images

Corporate Training

Employees can choose from a variety of courses to further their education and advance their jobs. Candidates' abilities are enhanced as a result of the SevenMentor institute's offerings, and they can pursue a more diverse professional path. Trainers at SevenMentor Training Institute prepare candidates till they are ready to enter the workforce. Employees will appreciate the extra classes, and the assessments will aid in their skill development. SevenMentor's training sessions are engaging and simple to comprehend.

Our Placement Process

Eligibility Criteria

Placements Training

Interview Q & A

Resume Preparation

Aptitude Test

Mock Interviews

Scheduling Interviews

Job Placement

Related Courses

Have a look at all our related courses to learn from any location

CCNA Security

Best Seller

CCNA Security class is the greatest training tool for engineers following the Cisco Certified Network Associate Security (CCNA Security) certification.

Explore Now

CCNP R&S

Best Seller

The CCNP Certification is just one among the vital certifications from Cisco a media professional must want to proceed in his profession.

Explore Now

CCIE R&S

Best Seller

An Advanced level in cisco certification-networking training is intended for professionals with prior experience in the networking field.

Explore Now

Request For Call Back

Class Room & Online Training Quotation

CCNA

Call The Trainer

Batch Timing

Request Call Back Class Room & Online Training Quotation

About CCNA

Online Classes

Course Eligibility

Syllabus CCNA R&S

Trainer Profile of CCNA

CCNA Exams & Certification

Proficiency After Training

Key Features

Skill level

Beginner, Intermediate, Advance

Course Duration

90 Hours

Total Learners

2000+ Learners

Frequently Asked Questions

How long should you study for the CCNA?

Is it worthwhile to take CCNA classes?

How many hours should I devote to studying for the CCNA?

Is the CCNA in high demand?

Is the CCNA certification free of charge?

Batch Schedule

Students Reviews

- Sakshi Deshmukh

- Anant Singh

- Vivek Biswas

Course video & Images

Corporate Training

Our Placement Process

Eligibility Criteria

Placements Training

Interview Q & A

Resume Preparation

Aptitude Test

Mock Interviews

Scheduling Interviews

Job Placement

Related Courses

CCNA Security

CCNP R&S

CCIE R&S

Request For Call Back

For More, Follow us on our Social Sites:

Request Call Back
Class Room & Online Training Quotation