CCIE

Most networking hopefuls are perplexed by the distinction between CCNP and CCIE courses in UK certifications. Cisco Certification offers three levels, as is well recognized throughout the world: Cisco CCNA certification, Cisco CCNP certification, and Cisco CCIE Course in UK certification.

Request Call Back

Call The Trainer

+91 7798058777

Batch Timing

Regular: 2 Batches
Weekends: 2 Batches

Request Call Back
Class Room & Online Training Quotation

Education is The Foundation Upon Which We Build Our Nation, lets Educate Oneself to Become Weapon Against Unemployment with Upto 70% Off On All Courses

About CCIE

Each level of Cisco certification has a wide range of applications in the IT networking business; nevertheless, the scope and job options expand from CCNA to CCIE. Cisco CCIE Training in UK certification has a broad reach and is one of the most sought-after and well-paid IT certifications in the world. If you want to start a career in networking, Cisco CCIE courses are the best way to get started. If you've already read about the distinctions between CCNA and CCNP certification, this post is a must-read for today.

What exactly is CCIE Certification?
CCIE Classes in UK is the highest and expert level certification issued by Cisco Systems and is available in a variety of technologies such as routing and switching, security, data center, collaboration, and so on. After completing your CCIE course certification, you will be given a CCIE number, which verifies your ability to design, construct, configure, troubleshoot, and manage sophisticated Cisco networks. Having the proper and finest training partner is essential for obtaining a CCIE. Cisco aspirants are supplied with specific facilities at SevenMentor in order to enable them to reach the most important milestone of their careers in the first attempt. We boast the world's largest laboratories, which are fully equipped with cutting-edge Cisco training equipment. NB's labs are open 24 hours a day, seven days a week, with real-time instructor assistance.

Advantages of CCIE Certification Over CCNP Certification
As previously stated, CCNP certification is at the professional level, whereas CCIE certification is at the expert level. In comparison to CCNP, the CCIE course certification is the most sought-after and highest-paying IT credential in the world. There is a high demand for CCIE Course in UK certified professionals, but the supply is like a drop in the ocean. As a result, there is a high need for CCNP certified professionals. Remember that in order to gain the benefits of being a CCIE or CCNP certified professional, you must have both hands-on technical skills and theoretical understanding. Enroll in the premier Cisco CCNA, CCNP, and CCIE training institute and watch your career take off.

CCIE Enterprise Infrastructure (CCIE)
Obtaining the CCIE Enterprise Infrastructure certification validates your expertise in complex enterprise infrastructure solutions. To obtain CCIE Corporate Infrastructure certification, you must pass two exams: a qualifying exam covering key commercial infrastructure technologies and just a hands-on lab exam covering computer systems from across network lifecycle, from planning and deploying to maintaining and optimizing. The new CCIE Enterprise Infrastructure certification adds to the information you have for today's expert-level job responsibilities in enterprise infrastructure technology. To assist you in scaling your organizational architecture, CCIE Organizational Infrastructure now provides orchestration and programmability. CCIE, one of the industry's most prestigious certifications, defines you as a technical leader.

Cisco - Certified - Internetwork - Expert is an abbreviation for Cisco - Certified - Internetwork - Expert, which is a technical credential offered by Cisco Systems. The CCIE and Cisco - Certified - Design - Expert (CCDE) certificates were created to assist businesses. They also analyze professional-level substructure networking design abilities throughout the world and identify the top level of internetworking specialists globally. These certificates are commonly regarded all over the world as the most important networking credentials in the field. The CCIE Classes in UK community has built a reputation for being at the forefront of the network field in terms of deep technical network information. In addition, CCIE certification training is used in the most technically stimulating networking projects. The professional-level certificate course is regularly revising and updating its testing equipment as well as processes in order to ensure and preserve the program's quality and significance. These professional-level certificate courses establish a standard for internetworking skills through a difficult written examination and a performance-oriented lab evaluation.

Cost of CCIE exam?
The cost of the CCIE certification exam is $2,050. Cisco offers seven professional-level credentials. Unlike other Cisco exams, the C-C-I-E requires both a written and a practical assessment. The C-C-I-E written examination costs 450 US dollars for each attempt. Each try of the C-C-I-E lab examination costs roughly $1,600. Each C-C-I-E certificate costs roughly $2,050. The entire exam contains study information, which is not included in the exam fee; nonetheless, a few of them required travel expenses. The lab examination is only available at 8 test locations throughout the world, which means additional costs for food, travel, and lodging.

Online Classes

SevenMentor & Training Pvt. Ltd. is a leading institute that provides a wide range of technological training and classes. Training that is well-established and scheduled is far more efficient than anticipated. Students can take an Online CCIE Course in UK with well-developed concepts. It is a highly rated institute for freshers looking to gain information and acquire high-paying employment. Online CCIE Classes in UK assist and guides candidates through interviews and tests.

Course Eligibility

Freshers
BE/ Bsc Candidate
Tech Support Engineers
Any Graduate
Any Post-Graduate
Working Professionals

Syllabus CCIE

Download Syllabus

Exam DescriptionThe CCIE® Routing and Switching Lab Exam version 5.0 is an eight-hour, hands-on exam which requires you to configure and troubleshoot a series of complex networks to given specifications. Knowledge of troubleshooting is an important skill and candidates are expected to diagnose and solve issues as part of the CCIE lab exam. You will not configure end-user systems, but are responsible for all devices residing in the network.The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
20% 1.0 Layer 2 Technologies

<1.1 LAN switching technologies
1.1.a Implement and troubleshoot switch administration
1.1.a (i) Managing MAC address table
1.1.a (ii) errdisable recovery
1.1.a (iii) L2 MTU
1.1.b Implement and troubleshoot layer 2 protocols
1.1.b (i) CDP, LLDP
1.1.b (ii) UDLD
1.1.c Implement and troubleshoot VLAN
1.1.c (i) access ports
1.1.c (ii) VLAN database
1.1.c (iii) normal, extended VLAN, voice VLAN
1.1.d Implement and troubleshoot trunkin
1.1.d (i) VTPv1, VTPv2, VTPv3, VTP pruning
1.1.d (ii) dot1Q
1.1.d (iii) Native VLAN
1.1.d (iv) Manual pruning
1.1.e Implement and troubleshoot etherchannel
1.1.e (i) LACP, PAgP, manual
1.1.e (ii) layer 2, layer 3
1.1.e (iii) load-balancing
1.1.e (iv) etherchannel misconfiguration guard
1.1.f Implement and troubleshoot spanning-tree
1.1.f (i) PVST+/RPVST+/MST
1.1.f (ii) switch priority, port priority, path cost, STP timers
1.1.f (iii) port fast, BPDUguard, BPDUfilter
1.1.f (iv) loopguard, rootguard
1.1.g Implement and troubleshoot other LAN switching technologies
1.1.g (i) SPAN, RSPAN, ERSPAN

1.2 Layer 2 Multicast
1.2.a Implement and troubleshoot IGMP
1.2.a (i) IGMPv1, IGMPv2, IGMPv3
1.2.a (ii) IGMP snooping
1.2.a (iii) IGMP querier
1.2.a (iv) IGMP filter
1.2.a (v) IGMP proxy

1.3 Layer 2 WAN circuit technologies
1.3.a Implement and troubleshoot HDLC
1.3.b Implement and troubleshoot PPP
1.3.b (i) authentication (PAP, CHAP)
1.3.b (ii) PPPoE
1.3.b (iii) MLPPP

1.4 Troubleshooting layer 2 technologies
1.4.a Use IOS troubleshooting tools
1.4.a (i) debug, conditional debug
1.4.a (ii) ping, traceroute with extended options
1.4.a (iii) Embedded packet capture
1.4.b Apply troubleshooting methodologies
1.4.b (i) Diagnose the root cause of networking issue (analyze symptoms,identify and describe root cause)
1.4.b (ii) Design and implement valid solutions according to constraints
1.4.b (iii) Verify and monitor resolution
1.4.c Interpret packet capture
1.4.c (i) Using wireshark trace analyzer
1.4.c (ii) Using IOS embedded packet capture

2.0 Layer 3 Technologies
2.1 Addressing technologies
2.1.a Identify, implement and troubleshoot IPv4 addressing and sub-netting
2.1.a (i) Address types, VLSM
2.1.a (ii) ARP
2.1.b Identify, implement and troubleshoot IPv6 addressing and sub-netting
2.1.b (i) Unicast, multicast
2.1.b (ii) EUI-64
2.1.b (iii) ND, RS/RA
2.1.b (iv) Autoconfig/SLAAC temporary addresses (RFC4941)
2.1.b (v) Global prefix configuration feature
2.2 Layer 3 Multicast
2.2.a Troubleshoot reverse path forwarding
2.2.a (i) RPF failure
2.2.a(ii) RPF failure with tunnel interface
2.2.b Implement and troubleshoot IPv4 protocol independent multicast
2.2.b (i) PIM dense mode, sparse mode, sparse-dense mode
2.2.b (ii) Static RP, auto-RP, BSR
2.2.b (iii) Bidirectional PIM
2.2.b (iv) Source-specific multicast
2.2.b (v) Group to RP mapping
2.2.b (vi) Multicast boundary
2.2.c Implement and troubleshoot multicast source discovery protocol
2.2.c.(i) Intra-domain MSDP (anycast RP)
2.2.c.(ii) SA filter
2.3 Fundamental routing concepts
2.3.a Implement and troubleshoot static routing
2.3.b Implement and troubleshoot default routing
2.3.c Compare routing protocol types
2.3.c (i) distance vector
2.3.c (ii) link state
2.3.c (iii) path vector
2.3.d Implement, optimize and troubleshoot administrative distance
2.3.e Implement and troubleshoot passive interface
2.3.f Implement and troubleshoot VRF lite
2.3.g Implement, optimize and troubleshoot filtering with any routing protocol
2.3.h Implement, optimize and troubleshoot redistribution between any routing protocol
2.3.i Implement, optimize and troubleshoot manual and auto
2.3.j Implement, optimize and troubleshoot policy-based routing
2.3.k Identify and troubleshoot sub-optimal routing
2.3.l Implement and troubleshoot bidirectional forwarding detection
2.3.m Implement and troubleshoot loop prevention mechanisms
2.3.m (i) Route tagging, filtering
2.3.m (ii) Split horizon
2.3.m (iii) Route poisoning
2.3.n Implement and troubleshoot routing protocol authentication
2.3.n (i) MD5
2.3.n (ii) key-chain
2.3.n (iii) EIGRP HMAC SHA2-256bit
2.3.n (iv) OSPFv2 SHA1-196bit
2.3.n (v) OSPFv3 IPsec authentication
2.4 RIP v2
2.4.a Implement and troubleshoot RIPv2
2.5 EIGRP (for IPv4 and Ipv6)
2.5.a Describe packet types
2.5.a (i) Packet types (hello, query, update, and such)
2.5.a (ii) Route types (internal, external)
2.5.b Implement and troubleshoot neighbor relationship
2.5.b (i) Multicast, unicast EIGRP peering
2.5.c Implement and Troubleshoot Loop free path selection
2.5.c (i) RD, FD, FC, successor, feasible successor
2.5.c (ii) Classic metric
2.5.c (iii) Wide metric
2.5.d Implement and troubleshoot operations
2.5.d (i) General operations
2.5.d (ii) Topology table, update, query, active, passive
2.5.d (iii) Stuck in active
2.5.d (iv) Graceful shutdown
2.5.e Implement and troubleshoot EIGRP stub
2.5.e (i) stub
2.5.e (ii) leak-map
2.5.f Implement and troubleshoot load-balancing
2.5.f (i) equal-cost
2.5.f (ii) unequal-cost
2.5.f (iii) add-path
2.5.g Implement EIGRP (multi-address) named mode
2.5.g (i) Types of families
2.5.g (ii) IPv4 address-family
2.5.g (iii) IPv6 address-family
2.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability
2.5.h (i) Describe fast convergence requirements
2.5.h (ii) Control query boundaries
2.5.h (iii) IP FRR/fast reroute (single hop)
2.5.h (iv) Summary leak-map
2.5.h (v) Summary metric
2.6 OSPF (v2 and v3)
2.6.a Describe packet types
2.6.a (i) LSA types (1, 2, 3, 4, 5, 7, 9)
2.6.a (ii) Route types (N1, N2, E1, E2)
2.6.b Implement and troubleshoot neighbor relationship
2.6.c Implement and troubleshoot OSPFv3 address-family support
2.6.c (i) IPv4 address-family
2.6.c (ii) IPv6 address-family
2.6.d Implement and troubleshoot network types, area types and router types
2.6.d (i) Point-to-point, multipoint, broadcast, non-broadcast
2.6.d (ii) LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
2.6.d (iii) Internal router, ABR, ASBR
2.6.d (iv) Virtual link\
2.6.e Implement and troubleshoot path preference
2.6.f Implement and troubleshoot operations
2.6.f (i) General operations
2.6.f (ii) Graceful shutdown
2.6.f (iii) GTSM (generic TTL security mechanism
2.6.g Implement, troubleshoot and optimize OSPF convergence and scalability
2.6.g (i) Metrics
2.6.g (ii) LSA throttling, SPF tuning, fast hello
2.6.g (iii) LSA propagation control (area types, ISPF)
2.6.g (iv) IP FR/fast reroute (single hop)
2.6.g (v) LFA/loop-free alternative (multi hop)
2.6.g (vi) OSPFv3 prefix suppression
22.7 BGP
2.7.a Describe, implement and troubleshoot peer relationships
2.7.a (i) Peer-group, template
2.7.a (ii) Active, passive
2.7.a (iii) States, timers
2.7.a (iv) Dynamic neighbors
2.7.b Implement and troubleshoot IBGP and EBGP
2.7.b (i) EBGP, IBGP
2.7.b (ii) 4 bytes AS number
2.7.b (iii) Private AS
2.7.c Explain attributes and best-path selection
2.7.d Implement, optimize and troubleshoot routing policies
2.7.d (i) Attribute manipulation
2.7.d (ii) Conditional advertisement
2.7.d (iii) Outbound route filtering
2.7.d (iv) Communities, extended communities
2.7.d (v) Multi-homing
2.7.e Implement and troubleshoot scalability
2.7.e (i) Route-reflector, cluster
2.7.e (ii) Confederations
2.7.e (iii) Aggregation, AS set
2.7.f Implement and troubleshoot multi-protocol BGP
2.7.f (i) IPv4, IPv6, VPN address-family
2.7.g Implement and troubleshoot AS path manipulations
2.7.g (i) Local AS, allow AS in, remove private AS
2.7.g (ii) Prepend
2.7.g (iii) Regexp
2.7.h Implement and Troubleshoot Other Features
2.7.h (i) Multipath
2.7.h (ii) BGP synchronization
2.7.h (iii) Soft reconfiguration, route refresh
2.8 Troubleshooting layer 3 technologies
2.8.a Use IOS troubleshooting tools
2.8.a (i) debug, conditional debug
2.8.a (ii) ping, traceroute with extended options
2.8.a (iii) Embedded packet capture
2.8.b Apply troubleshooting methodologies
2.8.b (i) Diagnose the root cause of networking issue (analyze symptoms,identify and describe root cause)
2.8.b (ii) Design and implement valid solutions according to constraints
2.8.b (iii) Verify and monitor resolution
2.8.c Interpret packet capture
2.8.c (i) Using wireshark trace analyzer
2.8.c (ii) Using IOS embedded packet capture

3.0 VPN Technologies
3.1 Tunneling
3.1.a Implement and troubleshoot MPLS operations
3.1.a (i) Label stack, LSR, LSP
3.1.a (ii) LDP
3.1.a (iii) MPLS ping, MPLS traceroute
3.1.b Implement and troubleshoot basic MPLS L3VPN
3.1.b (i) L3VPN, CE, PE, P
3.1.b (ii) Extranet (route leaking)
3.1.c Implement and troubleshoot encapsulation
3.1.c (I) GRE
3.1.c (ii) Dynamic GRE
3.1.d Implement and troubleshoot DMVPN (single hub)
3.1.d (i) NHRP
3.1.d (ii) DMVPN with IPsec using preshared key
3.1.d (iii) QoS profile
3.1.d (iv) Pre-classify
3.2 Encryption
3.2.a Implement and troubleshoot IPsec with preshared key
3.2.a (i) IPv4 site to IPv4 site
3.2.a (ii) IPv6 in IPv4 tunnels
3.2.a (iii) Virtual tunneling interface (VTI)
3.3 Troubleshooting VPN technologies
3.3.a Use IOS troubleshooting tools
3.3.a (i) debug, conditional debug
3.3.a (ii) ping, traceroute with extended options
3.3.a (iii) Embedded packet capture
3.3.b Apply troubleshooting methodologies
3.3.b (i) Diagnose the root cause of networking issue (analyze symptoms,identify and describe root cause)
3.3.b (ii) Design and implement valid solutions according to constraints
3.3.b (iii) Verify and monitor resolution
3.3.c Interpret packet capture
3.3.c (i) Using wireshark trace analyzer
3.3.c (ii) Using IOS embedded packet capture

4.0 Infrastructure Security
4.1 Device security
4.1.a Implement and troubleshoot IOS AAA using local database
4.1.b Implement and troubleshoot device access control
4.1.b (i) Lines (VTY, AUX, console)
4.1.b (ii) SNMP
4.1.b (iii) Management plane protection
4.1.b (iv) Password encryption
4.1.c Implement and troubleshoot control plane policing
4.2 Network security
4.2.a Implement and troubleshoot switch security features
4.2.a (i) VACL, PACL
4.2.a (ii) Stormcontrol
4.2.a (iii) DHCP snooping
4.2.a (iv) IP source-guard
4.2.a (v) Dynamic ARP inspection
4.2.a (vi) Port-security
4.2.a (vii) Private VLAN
4.2.b Implement and troubleshoot router security features
4.2.b (i) IPv4 access control lists (standard, extended, time-based)
4.2.b (ii) IPv6 traffic filter
4.2.b (iii) Unicast reverse path forwarding
4.2.c Implement and troubleshoot IPv6 first hop security
4.2.c (i) RA guard
4.2.c (ii) DHCP guard
4.2.c (iii) Binding table
4.2.c (iv) Device tracking
4.2.c (v) ND inspection/snooping
4.2.c (vi) Source guard
4.2.c (vii) PACL
4.0 Infrastructure Security
4.3 Troubleshooting infrastructure
4.3.a Use IOS troubleshooting tools
4.3.a (i) debug, conditional debug
4.3.a (ii) ping, traceroute with extended options
4.3.a (iii) Embedded packet capture
4.3.b Apply troubleshooting methodologies
4.3.b (i) Diagnose the root cause of networking issue (analyze symptoms,identify and describe root cause)
4.3.b (ii) Design and implement valid solutions according to constraints
4.3.b (iii) Verify and monitor resolution
4.3.c Interpret packet capture
4.3.c (i) Using wireshark trace analyser
4.3.c (ii) Using IOS embedded packet capture

5.0 Infrastructure Services
5.1 System management
5.1.a Implement and troubleshoot device management
5.1.a (i) Console and VTY
5.1.a (ii) telnet, HTTP, HTTPS, SSH, SCP
5.1.a (iii) (T)FTP
5.1.b Implement and troubleshoot SNMP
5.1.b (i) v2c, v3
5.1.c Implement and troubleshoot logging
5.1.c (i) Local logging, syslog, debug, conditional debug
5.1.c (ii) Timestamp
5.2 Quality of service
5.2.a Implement and troubleshoot end to end QoS
5.2.a (i) CoS and DSCP mapping
5.2.b Implement, optimize and troubleshoot QoS using MQC
5.2.b (i) Classification
5.2.b (ii) Network based application recognition (NBAR)
5.2.b (iii) Marking using IP precedence, DSCP, CoS, ECN
5.2.b (iv) Policing, shaping
5.2.b (v) Congestion management (queuing)
5.2.b (vi) HQoS, sub-rate ethernet link
5.2.b (vii) Congestion avoidance (WRED)
5.3 Network services
5.3.a Implement and troubleshoot first-hop redundancy protocols
5.3.a (i) HSRP, GLBP, VRRP
5.3.a (ii) Redundancy using IPv6 RS/RA
5.3.b Implement and troubleshoot network time protocol
5.3.b (i) NTP master, client, version 3, version 4
5.3.b (ii) NTP authentication
5.3.c Implement and troubleshoot IPv4 and IPv6 DHCP
5.3.c (i) DHCP client, IOS DHCP server, DHCP relay
5.3.c (ii) DHCP options
5.3.c (iii) DHCP protocol operations
5.3.c (iv) SLAAC/DHCPv6 interaction
5.3.c (v) Stateful, stateless DHCPv6
5.3.c (vi) DHCPv6 prefix delegation
5.3.d Implement and troubleshoot IPv4 network address translation
5.3.d (i) Static NAT, dynamic NAT, policy-based NAT, PAT
5.3.d (ii) NAT ALG
5.4 Network optimization
5.4.a Implement and troubleshoot IP SLA
5.4.a (i) ICMP, UDP, jitter, VoIP
5.4.b Implement and troubleshoot tracking object
5.4.b (i) Tracking object, tracking list
5.4.b (ii) Tracking different entities (e.g. interfaces, routes, IPSLA, and such)
5.4.c Implement and troubleshoot netflow
5.4.c (i) Netflow v5, v9
5.4.c (ii) Local retrieval
5.4.c (iii) Export (configuration only)
5.4.d Implement and troubleshoot embedded event manager
5.4.d (i) EEM policy using applet
5.5 Troubleshooting infrastructure services
5.5.a Use IOS troubleshooting tools
5.5.a (i) debug, conditional debug
5.5.a (ii) ping, traceroute with extended options
5.5.a (iii) Embedded packet capture
5.5.b Apply troubleshooting methodologies
5.5.b (i) Diagnose the root cause of networking issue (analyze symptoms,identify and describe root cause)
5.5.b (ii) Design and implement valid solutions according to constraints
5.5.b (iii) Verify and monitor resolution
5.5.c Interpret packet capture
5.5.c (i) Using wireshark trace analyzer
5.5.c (ii) Using IOS embedded packet capture

Trainer Profile of CCIE

SevenMentor Certification is Accredited by all major Global Companies around the world. We provide after completion of the theoretical and practical sessions to fresher’s as well as corporate trainees.
Our certification at SevenMentor is accredited worldwide. It increases the value of your resume and you can attain leading job posts with the help of this certification in leading MNC’s of the world. The certification is only provided after successful completion of our training and practical based projects.

CCIE Exams & Certification

Get Certified

Proficiency After Training

Can Configure and Troubleshoot Switches, HDLC and PPP
Configure and troubleshooting VPN (DMVPN)
Understand how to control IGP Updates with the help of Route Maps and Distribute Lists
Work on Label Switching (Multiprotocol) & Layer 3 VPN

Key Features

Skill Level

Beginner, Intermediate, Advance

We are providing Training to the needs from Beginners level to Experts level.

Course Duration

90 Hours

Course will be 90 hrs to 110 hrs duration with real-time projects and covers both teaching and practical sessions.

Total Learners

2000+ Learners

We have already finished 100+ Batches with 100% course completion record.

Frequently Asked Questions

Is the CCIE worth it?

The simple answer is YES, CCIE Certification is the pinnacle of any Cisco Network engineer's career, and the amount of knowledge you will gain while preparing for it is astounding.

What can a CCIE get you?

After earning your CCIE, you are overqualified for all but the most demanding employment roles. The CCIE is designed for "expert-level engineers who need to build, run, and troubleshoot large, converged network systems," according to Cisco.

How should I prepare for the CCIE exam?

Practice, practise, and practise are the three most critical things to do to prepare for the lab exam, and this applies to both the troubleshooting and configuration sections. In contrast, Cisco advises two to four years.

Which CCIE is the simplest?

Before you begin preparing for a lab exam, be sure you have solid Troubleshooting skills and understand the concepts.

What exactly is CCIE collaboration?

The new CCIE Collaboration certification has been tailored to capitalise on the knowledge gained at the new CCNP level. The certification certifies your end-to-end lifecycle skills in complex collaboration solutions, from planning and design through operation and optimization.

Batch Schedule

DATE	COURSE	TRAINING TYPE	BATCH	CITY	REGISTER
16/12/2024	CCIE	Online	Regular Batch (Mon-Sat)	UK	Book Now
17/12/2024	CCIE	Online	Regular Batch (Mon-Sat)	UK	Book Now
21/12/2024	CCIE	Online	Weekend Batch (Sat-Sun)	UK	Book Now
21/12/2024	CCIE	Online	Weekend Batch (Sat-Sun)	UK	Book Now

Students Reviews

Excellent learning environment. He was a good teacher. I was able to perform successfully and was employed in a renowned company. Training was well-focused, and points were assigned as notes.

- Devika Shenoy

I had a nice experience. My objective was met. I had little difficulty completing it effectively. I am now relieved that my skills will be useful in my job.

- Pranit Kawde

The tests and practicals were excellent. I got a good score, and my trainers helped me get into a good MNC. I am pleased.

- Kajal Moghe

Course video & Images

Corporate Training

Corporate Courses are intended specifically for individuals who want to improve their abilities and perform successfully in their particular firms. SevenMentor & Training Pvt. Ltd. also focuses on employee training. Employees can gain skills in their designing and construction careers by taking Corporate CCIE course in UK. In most firms, CCIE courses are required and expected to have skill. Our tests can assist employees. The practical training improves your ability to implement.

Our Placement Process

Eligibility Criteria

Placements Training

Interview Q & A

Resume Preparation

Aptitude Test

Mock Interviews

Scheduling Interviews

Job Placement

Related Courses

Have a look at all our related courses to learn from any location

CCIE Security

Best Seller

Learn & get CCIE Security training certification. A master level network Security training for those who have knowledge for advance Network Security Solutions implementation and maintains skills.

Explore Now

CCNA CyberOps

Best Seller

We as SevenMentor Provide best Training for CCNA CyberOps certification in Pune with regular and weekend classes with best IT Lab infrastructure.

Explore Now

CCNA Cloud

Best Seller

SevenMentor is considered as a Best CCNA Cloud Training in an era of cloud computing and all the infrastructure, software, and platforms of a business will be there on cloud...

Explore Now

Request For Call Back

Class Room & Online Training Quotation

CCIE

Call The Trainer

Batch Timing

Request Call Back Class Room & Online Training Quotation

About CCIE

Online Classes

Course Eligibility

Syllabus CCIE

Trainer Profile of CCIE

CCIE Exams & Certification

Proficiency After Training

Key Features

Skill Level

Beginner, Intermediate, Advance

Course Duration

90 Hours

Total Learners

2000+ Learners

Frequently Asked Questions

Is the CCIE worth it?

What can a CCIE get you?

How should I prepare for the CCIE exam?

Which CCIE is the simplest?

What exactly is CCIE collaboration?

Batch Schedule

Students Reviews

- Devika Shenoy

- Pranit Kawde

- Kajal Moghe

Course video & Images

Corporate Training

Our Placement Process

Eligibility Criteria

Placements Training

Interview Q & A

Resume Preparation

Aptitude Test

Mock Interviews

Scheduling Interviews

Job Placement

Related Courses

CCIE Security

CCNA CyberOps

CCNA Cloud

Request For Call Back

For More, Follow us on our Social Sites:

Request Call Back
Class Room & Online Training Quotation